MODEL 78102A


MODEL 78102Ai

FLOOR CRANE
2 TON CAPACITY
(Boom retracted)
INTENDED USE
 Designed to raise, lower and transport automobile engines, transmissions, differentials and other heavy loads with minimal effort.
FEATURES
Four adjustable legs provide greater stability. Six position telescopic boom with 3/8" proof chain and hook. 3 ton capacity hydraulic power unit provides faster rising action, a large diameter ram to withstand angle loads and an access hole that enables optional pumps to be adapted.
Click here for information on pumps. Four full swivel ball bearing caster wheels provide easy maneuvering and positioning. Low profile design (4-3/4" from top of base to ground) allows positioning under low ground clearance vehicles.
MODEL 78106


MODEL 78106i

FOLDABLE FLOOR CRANE
2 TON CAPACITY
(Boom retracted)

INTENDED USE
 Same as the model 78102A
FEATURES
Similar to model 78102A with the following exceptions:
Quick foldable legs and boom save shop space and prepare crane for transport or storage within seconds.
4" diameter front wheels and rear swivel caster wheels provide positive steering and easy maneuvering.
High strength wheels with roller bearings and polyurethane tread protect shop and display floors.
Five position telescopic boom with 3/8" proof chain and hook.

MODEL 78204A
TRUCK CRANE
1/2 TON CAPACITY
(Boom retracted)

INTENDED USE
 Same as the model 78102A but mounts in the bed of a truck or on a loading dock.
FEATURES
Four position telescopic boom that folds down for traveling position or storage. 5 to 1 gear ratio winch with 20 foot long 1/4" diameter steel cable and hook pull the load toward the boom.
Winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
Hydraulically activated boom lifts the load to the desired height. Crane swivels 360 degrees but can be locked in position.

MODEL 78600A
FLOOR CRANE
AIR/HYDRAULIC
3 TON CAPACITY 		MODEL 78605
ELECTRO/HYDRAULIC
3 TON CAPACITY

INTENDED USE
 For lifting heavy items including removal and installation of diesel engines and often their transmissions.
FEATURES
Multiple boom and leg extensions provide maximum stability.
Boom swivels 10 degrees right or left if base cannot be centered under the load.
Floor lock secures crane from moving when in use.
Model 78600A includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.
Model 78605 includes an electro/hydraulic pump requiring 115 VAC.
Note: Click here to see information concerning air and electro/hydraulic pumps.
*Model not shown has same basic construction as model pictured.


Metrohydraulic © Norco
Norco Catalog