FEATURES Fully adjustable universal saddle with adjustable corner brackets and safety chain. Safety by-pass system prevents damage to cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Full 360 degree rotating pump handle operates in any position. Flash chromed ram inhibits rust from entering the hydraulic system. Four full-swivel ball bearing caster wheels for easy positioning. Wide chassis for efficient load distribution and stability. Six optional saddle adapters for specific transmission are described here.

MODEL 72000D


MODEL 72000Di

1-1/2 TON CAPACITY

INTENDED USE For heavy truck transmissions. Ideally suited for truck dealers, maintenance and heavy duty transmission repair centers.

FEATURES Wide chassis with open front provides: -Wider opening for saddle and transmission to come lower to the ground for easy removal. -Efficient load distribution and stability. -Easy access to saddle tilt knobs. Fully adjustable universal saddle with adjustable arms to position the transmission. Heavy duty chain with convenient chain tensioner secures load to the saddle. Safety by-pass system prevents damage to the hydraulic cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Full 360 degree rotating pump handle operates in any position. Flash chromed ram inhibits rust from entering the hydraulic system. Four full-swivel ball bearing caster wheels for easy positioning.

MODEL 72020
1 1/2 TON CAPACITY

INTENDED USE
For heavy truck transmissions. Ideally suited for truck dealers, maintenance and heavy duty transmission repair centers. The model 72020 is a low cost import alternative with a closed-end design (not a replacement) for the current U.S.A. made model 72000D with an open-end design.

MODEL 72001
DIFFERENTIAL ADAPTER

Differential adapter is used with model 72000D, 72000 and 72800 jacks only. Adapter fits most differentials and replaces the universal saddle when used. Weight: 29 lbs.

MODEL 72300
SINGLE STAGE
1/2 TON CAPACITY

INTENDED USE
An economical jack designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.

FEATURES Fully adjustable universal saddle with adjustable corner brackets and safety chain. Single stage "Parkerized" ram and pump piston inhibit rust from entering hydraulic system. Wide base with four 3" diameter swivel ball bearing caster wheels, provides stability and easy maneuvering. 3 ton capacity NORCO/KYB power unit provides a large diameter ram for added load stability.

MODEL 72500C
1/2 TON CAPACITY
SINGLE PUMP

INTENDED USE Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.

FEATURES Fully adjustable universal saddle with adjustable corner brackets and safety chain. Safety overload system prevents jack from being used beyond its rated capacity. Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission. Two-stage flash chromed rams inhibit rust from entering hydraulic system. Wide base with four 3" diameter swivel ball bearing caster wheels, provides stability and easy maneuvering.

MODEL 72550
1/2 TON CAPACITY
AIR and HYDRAULIC

INTENDED USE Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.
FEATURES Same as model 72500C but with 2 times faster rising action without load. 2 times faster rising action with a load up to 400 pounds. Same rising action as model 72500C for loads between 400 and 1,000 pounds.

MODEL 72400B
1/2 TON CAPACITY
AIR and HYDRAULIC

INTENDED USE Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.

FEATURES Pneumatic primary stage for fast rising is activated by depressing a foot pedal. Hydraulic secondary stage is activated by a fast rising hand pump to raise the load and release a knob to lower the load. Safety by-pass system prevents the ram from being overextended and causing damage to the cylinder. Air and hydraulic rams are flash chromed to inhibit rust. Fully adjustable universal saddle with adjustable corner brackets and safety chain. Wide base with four 3" diameter swivel ball bearing caster wheels provides stability and easy maneuvering.

OPTIONAL ADAPTERS and SADDLES
Fit models 72050C, 72300, 72500C, 72550 and 72400B transmission jacks.

MODEL 72508
100 LBS. CAPACITY

INTENDED USE An optional saddle adapter which is used in conjunction with a Norco transmission jack to remove, install and transport (in the lowered position) automobile and light truck fuel tanks and other undercar components.
FEATURES Handles automotive and light duty truck fuel tanks up to 40 gallon capacity. Tanks are to be emptied before handling. Four adjustable support risers with rubber pads protect the fuel tank and can be quickly positioned to fit many shapes and sizes. Includes two load restraint straps. Weight: 37 lbs.

MODEL 72525
QUICK ADJUST SADDL

INTENDED USE An optional saddle that replaces the four adjustable corner brackets found on the standard universal saddle.
FEATURES Quickly adapts to the existing universal saddle plate. Four low profile ratcheting arms quickly and easily adjust to the transmission pan configuration. Weight: 9 lbs.

MODEL 72507A
FORD E40D ADAPTE

For use on Ford E40D and 4R100 (4 wheel drive) truck and van transmissions. Weight: 37Lbs.

MODEL 72509
FORD UNIVERSAL ADAPTE

For use on Ford 5R55W, 4R70W, AX4N, AXOD METRIC transmissions. This one adapter can quickly and easily be adjusted to fit fourdifferenttransmission configurations. Weight: 38Lbs.

ADAPTERS

MODEL 72501B For use on GMC 4WD transmission case. Weight: 18 lbs.
MODEL 72502B For use on 4 and 5 speed truck transmissions. Weight: 13 lbs.
MODEL 72504B For use on GMC front wheel drive transmissions. Weight: 24 lbs.
MODEL 72505B For use on GMC front wheel drive transmissions (X, J & A bodies) 3T40. Weight: 158 lbs.
MODEL 72506B For use on GMC 440 metric transmissions 4T60-E. Weight: 11-1/2 lbs.

MODEL 72675
1250 LBS. CAPACITY

INTENDED USE The Power Train Lift/Table not only handles transmissions and fuel tanks, but also engines and transaxles, rear ends and leaf springs. The Model 72675 serves as a work table where the components can be lowered to a stable and secure work height for repair.

FEATURES An air/hydraulic foot pump includes a metered valve for safe lowering of the load. The pump can be removed from its holder, placed closer to the lift saddle, leaving hands free to accurately position the load. Fully adjustable saddle with two ratchet tie downs secure the load to the saddle. Four swivel ball bearing caster wheels with polyurethane tread protect floors yet provide easy maneuverability. The rear caster wheels have a double locking feature. One lock prevents the rear wheels from turning when the lift is used in a repair mode. The other locks the rear casters in a fixed direction to provide steering ability. The optional models 72508 Fuel Tank Saddle Adapter and 72655 Transmission Saddle Adapter can quickly and easily be installed for specific applications