MODEL 82302B
1/2 TON CAPACITY

INTENDED USE For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

FEATURES Heavy duty lift arms made with ball bearing conveyor rollers which allow easy rotation of wheels for alignment with bolt pattern. 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum. A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation. The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle. A hydraulic jack tilts the lift arms in order to match the angle of the spindle. Safety chain provided to secure tires and wheels to the dolly. Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.

INTENDED USE For the removal and installation of single, tandem and duplex tires and wheels.

FEATURES Rear swivel caster wheel and rigid front wheels provide positive steering for the model 82300C. Swivel caster wheels both fore and aft provide side to side maneuverability for the model 82301C. Wheels with polyurethane tread protect floor. Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations. Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment. Lift arms supported at both ends minimize wheel movement. Adjustable height push bar provides unobstructed access to hub area. 3-1/4" travel adjustment on rear caster wheel matches lifting arms with spindle angle.

MODEL 82303A
LIFT / TILT WHEEL DOLLY
1/2 TON CAPACITY

INTENDED USE Same as the models 82300C and 82301C but with added tilt features.
FEATURES Patented tilt design positions wheel at 45 degree angle for easy wheel bearing installation and waste oil removal. Wheel inspection made easier at 45 degree tilt angle. Four 4" diameter swivel caster wheels for easy positioning.