Metro Hydraulic Jack Co.
Metro Hydraulic Jack Co.
1271 McCarter Hwy. P.O. Box 9410
Newark, NJ 07104
Phone: (800) 633-8234 or (973) 350-0111
Fax: (973) 350-0112
Email: sales@metrohydraulic.com
Website: www.metrohydraulic.com
Facilities: Facilities: 20,000 sq. ft.
Print Back
  • Deliver a powerful punch to operate single-acting or doubleacting cylinders.
  • Integral roll cage protects pump from abuse.
  • 1 hp, single phase, permanent magnet motor.
  • Start under full load even when voltage is reduced to 50% of nominal rating.
  • High performance to weight ratio.
  • Quiet operation: 82 dBA at 10,000 psi and 87 dBA at 0 psi. CSA rated for intermittent duty.
  • Remote controls and/or solenoid valves feature 24 volt controls.
    “Posi-Check” valve design, “Posi-Check” guards against pressure loss when valve is shifted from “advance” to “hold” position.
    Shipped with 1 gal. of oil (231 cu. in., 210 usable).
    For 220/230 volt, 50/60 Hz. add suffix “- 220” (example PE302-220).
Unit of Measure

Specifications

Description

 N/A PE304, except has remote motor control.

Capacity

 N/A 30 cu. inch/min

For Use With

 N/A Double Acting

Valve Type

 N/A 4-Way, 3 Position.Tandem Ctr.

Valve No.

 N/A 9506

Valve Function

 N/A Advance Hold Return

Control Switch

 N/A Remote Motor Control (10 ft.)

Motor (4000 rpm)

 N/A 1 hp 110/115 VAC, 50/60 Hz, Single Phase

Reservoir Usable Oil Capacity

 N/A 280 cu. inch

Ship Weight

 N/A 56 lbs.