Metro Hydraulic Jack Co.
Metro Hydraulic Jack Co.
1271 McCarter Hwy. P.O. Box 9410
Newark, NJ 07104
Phone: (800) 633-8234 or (973) 350-0111
Fax: (973) 350-0112
Email: sales@metrohydraulic.com
Website: www.metrohydraulic.com
Facilities: Facilities: 20,000 sq. ft.
Print Back
30 Ton Capacity can be used with Nos. 1126 and 1127 bearing pulling attachments or No. 680 pulley pulling attachments (two 8012 adapters are required to connect 680 to puller). Can be used with No. 1165 internal pulling attachment. Leg ends threaded 1 Inch - 14. No. 1109 legs and No. 28390 leg ends Included. Wt., 44 lbs.
Unit of Measure

Specifications

Weight

 N/A 8 lbs.

Ship Weight

 N/A 8 lbs.

Tool Assembling

N/A

Assembling the tool to apply pushing or pulling force:
1.Determine if you want the tool’s forcing screw to push or pull.
2. To exert pushing force, the forcing nut is installed beneath the cross block, as shown on left.
3. To cause the forcing screw to pull, the forcing nut is placed on top of the cross block.
4. The sliding plates must always be placed on the opposite side of the cross block from the forcing nut.